01327 858001 
sales@dustcontrol.co.uk 
Manual shutter valves are used for stationary machine connection or in cases where a permanent hose connection is desired. By pulling the handle the valve opens.
On systems with on demand start-stop, the shutter valve should be equipped with a micro-switch. This will give a start-stop signal for vacuum producer control.
Technical Data
| Description | Control | Part No |
|---|---|---|
| Ø50 mm | – | 805201 |
| Ø50 mm | Micro-switch | 809101 |
| Ø76 mm | – | 804300 |
| Ø76 mm | Micro-switch | 809200 |
| Ø108 mm | – | 808300 |
| Ø160 mm | – | 8254 |
| Ø200 mm* | – | 8017 |
| Ø250 mm* | – | 8016 |
| *Note! Shutter Valve Ø200 and Ø250 only for clean air. | ||
