+ 46 8 531 940 00 
support@dustcontrol.se 
Electrically driven shutter valves can be built for special applications. Note that the speed of the gate will be much slower for an electrical shutter than for a standard shutter.
Technical Data
| Description | V | Part No |
|---|---|---|
| 76 EL | 230 | 804411 |
| 108 EL | 230 | 808407 |
| 160 EL | 230 | 825407 |
Accessories Shutter Valve Auto and Electric
| Part No | Description | |
|---|---|---|
 |
8047 | Pressure Switch Installed on pneumatic cylinders to supply electrical signals for start-stop control of vacuum producer. Gives signal when valve is opened |
 |
8152 | T Fitting Required for installation of the 8047 Pressure Switch. |
 |
8040 | Manual Switch For manual actuation of auto shutters. |
 |
8020 | Flow Valve Actuates an auto shutter when installed in compressed air supply to a pneumatic tool. Controls on demand extraction. 8020 should be supported by compressed air according to PNEUROP 6611 CLASS 3. CA supply must be clean and dry, 90 PSI recommended. |
 |
8026
8054 8088 |
8026 Solenoid 24 V DC 8054 Solenoid 230 V AC 8088 Solenoid 24 V AC A separate solenoid is used for example, on stationary machines and in connection with a manual switch. The solenoid is connected pneumatically to the auto shutter. Generally installed in control panel of the subject machine. |
 |
8196 | Auto-start 230 V AC Auto-start control is used for on demand extraction for electric tools (max 8 amps on subject tool). The auto-start current sensor closes a relay to give solenoid actuation of an auto shutter. |
 |
8029 | Transformer 230/24 V AC 4 A Supply transformer for 8168 Welding Auto-start. |
 |
8168 | Welding Auto-start with current sensor Used for automatic control of extraction in induction welding applications. Striking an arc will cause the current sensor to close a relay. In turn the relay causes solenoid‑ actuation of an auto shutter. This control must be supplied with 24 VAC 0.5 A. |
